What A Flywheel is : Why You Have 1 in Your Car

7 minutes, 28 seconds Read

In this Article we will be looking at what A flywheel is a heavy disk connected to the engine by a shaft. The energy stored in the flywheel is used to keep the engine running when there is a power outage or loss of power. The flywheel stores energy from the engine and releases it when needed. It is kept spinning by the engine’s power, and when power is lost, the flywheel slows down and eventually stops.

Flywheels are often used in engines where they help to smooth out power delivery. In a car, a flywheel is usually found between the engine and the transmission. A strong drive shaft connects the flywheel to the transmission accessory pulley at the rear of the car. The bad points about using a Flywheel on a racing vehicle are that it is heavy and more difficult to add more power than you have initially. Normally in a racing vehicle, instead of engaging motors directly, the flywheels send them output through belt’s which rotates faster than compared with cog wheels.

The flywheel referred to is driven by the engine’s crankshaft, until the engine reaches speed. When starting an automotive internal combustion engine , it is common practice to manually rotate fast moving objects as they are started, so as to start them at a slight velocity, thus preventing stalling by reducing sudden mass discontinuity with parts of the initial mass (i.e., volume

Read Also Mazda 60000 Mile Service

What the flywheel does

But what exactly is the function of the flywheel? It serves a number of distinct functions, including the following:
Your vehicle’s engine relies on the mass provided by the flywheel in order to maintain rotational inertia. If you don’t keep your foot on the accelerator, the engine will stall when you take your foot off the pedal.
It maintains the engine’s equilibrium.

The rough sensation that can be caused by even a slight imbalance is smoothed out by the use of a flywheel, which is specifically weighted to the crankshaft of the vehicle.
It makes the use of an electric starter possible. When the engine is started, the starter motor turns the starter ring, which is located on the outer edge of the flywheel.

The clutch is what connects the engine to the transmission; the flywheel is what connects the transmission to the engine so that power may be transferred to the wheels.

It is possible to disengage the clutch disc from the flywheel by placing your foot on the clutch pedal.
This is how a car can remain motionless while the shifter is in gear, and it is also how a car can coast to a stop without using the brakes.

But as soon as the foot is taken off the pedal, the clutch disc will make a strong contact with the flywheel.
When this occurs, the crankshaft of the engine and the transmission input shaft rotate at the same speed.


The flywheel is a substantial metal disc that is used in manual transmissions.
Cast iron, steel, and even aluminum are some of the materials that are typically used in its construction.

It is extremely rigid so that it will not flex or warp while it is being used.
There is a row of gear teeth along the outer edge of the flywheel that interacts with the starter motor of the engine.
Inside the bell housing, the flywheel has a secure bolt attachment to a flange that is located on the transmission side of the crankshaft.
On the side that faces the manual transmission, the surface that the clutch disc will grab onto has been machined so that it is flat.

Common Problems With The Flywheel

A flywheel is exceptionally long-lasting due to the robust nature of its construction.
That is not to say that issues will never arise; rather, it just means that they will occur much less frequently.
Contamination is one of the most frequently encountered issues that can arise with flywheels.
It is possible for oil to leak onto the flywheel if either the transmission front input shaft seal or the rear main crankshaft seal is leaking.

It results in excessive friction and heat as well as slipping of the clutch.
It is possible for there to be warpage or hot spots, which will cause a vibration during engagement and acceleration.
Flywheels in high-performance or heavy-duty vehicles are subject to stresses that can, in the most extreme of circumstances, cause them to crack.

Advantages of Using a FlyWheel.

A flywheel is a mechanical device that stores energy and can be used to provide continuous power output. Flywheels are often used in cars because they offer a number of advantages over other power sources.

One advantage of using a flywheel is that it can help to even out power delivery. This is because the flywheel store energy and then releases it in a smooth and consistent manner. This can be beneficial when driving in stop-start traffic or on winding roads where uneven power delivery can cause the car to jerk.

Another advantage of using a flywheel is that it helps to improve fuel economy. This is because the flywheel can provide power when the engine is not running at its most efficient speed. This can help to save fuel as the engine does not have to work as hard to maintain a constant speed.

A final advantage of using a flywheel is that it can provide emergency power. If the engine fails, the flywheel can continue to provide power for a short period of time. This can help to get the car safely off the road and to a safe location.

Disadvantages of Using a FlyWheels.

Though flywheels can offer some advantages, there are also some disadvantages to using them. One such disadvantage is that they can be expensive. Additionally, flywheels are not always available for all makes and models of cars. Another potential downside to using a flywheel is that they can add weight to the car, which may impact its performance.


When there is a worry about warpage or hot spots, the flywheel might need to be resurfaced so that it can once again provide a level, even surface for the clutch to mate to.
If resurfacing the flywheel cannot be accomplished, the only alternative option for repair is to replace it.
The labor costs associated with resurfacing a flywheel typically range between $500 and $650 on average.

If the flywheel needs to be replaced, the typical cost of the repair ranges from $700 to $1,200 depending on the make and model of the vehicle.

It is also a good time to change the clutch if it is getting close to the point where it needs to be replaced you can reach  https://wrench.com


How much does it typically cost to have a car’s flywheel repaired or replaced?

It is possible that at some point during the time you own the car, you will be required to completely replace the flywheel. To replace an automobile’s flywheel with a new one will cost approximately $717 in labor expenses and approximately $170 in parts costs on average, bringing the total cost to approximately $887. The average cost of goods is approximately $170, while the average cost of labor is approximately $717.

Can you drive a car with a broken flywheel?

No, to put it succinctly. In an automobile with a manual transmission, the power is transferred from the engine through the clutch disc to the wheels by the use of a flywheel. It is essentially a large disc that can store energy and contributes to the engine’s continued operation in a smooth manner. If you were to remove it, it would make operating the vehicle extremely difficult, if not impossible.

What is it that causes damage to the flywheel?

The following are some of the most often occurring causes: Improper maintenance. It is possible for other parts to suffer damage or shift out of alignment if certain components, such as a brand-new starter or clutch, are not put correctly. To add onto this point, it is highly recommended to get the clutch changed as quickly as possible in the event that it sustains any kind of damage.

Finally, Conclusion

A flywheel is a rotating mechanical device that is used to store energy. Flywheels are often used in cars because they can help to smooth out the engine’s power delivery and make it more efficient. Having a flywheel on a car can also help to improve its acceleration. As a result, companies are looking for ways to make flywheels more powerful and efficient. You may want to learn about how flywheel systems work if you travel in an electric or hybrid vehicle. This article provides good information on these topics as well as how compressed-air vehicles use flywheels. Want more information on how to make Flywheel cars? Now you can check out how exactly they work.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *